[logiciel creation site] [creation site internet] [creation site web] []
[EN_132]
[EN_135]
[EN_136]
[EN_137]
[]
[EN_283_Business_Area]
[EN_133]
[]
[EN_141 Anti corrosion]
[EN_142_AeroGel]
[EN_143_Dry_auto_lubrificating]
[EN_145_Adhesive_films]
[EN_152_Adhesive_fabrics]
[]
[EN_147_Baking_sheet]
[]
[EN_149_Architectural_fabric]
[]
[Acceuil_EN]
[ID6]
[EN_138]
[EN_139]
[EN_138]
[EN_140]

FluoroNet

Go to…  Download our PDF files

Fluoropaint :      Technical-data-sheet-standard-fluoronet.pdf

                        Technical-data-sheet-gel-fluoronet.pdf


 



















TECHNICAL DATA SHEET


I - Identification of product

 

Product Name : FLUORONET Cleaning product

Product Code :  FLUORONET/STANDARD

Supplier :          FluoroComposites – ZA Saint Louis – RN 100 –84250 Le Thor (France)

 

II - Composition / Information about components

Soluble in water.

Slightly thickening soap formulation with active tension solvent (without phosphates).

3% - 5% Alchilene

N.67/548/CEE :  607/194/00/1   CAS : 108/32/7   EINECS : 203/572/1


III - Hazards

No specific risks with normal use.

 

IV - First Aid

In the event of contact with skin : wash throroughly with soap and water.

In the event contact with eyes : wash immediatly with water for at least 10 minutes.

In the event of ingestion : induce vomiting. CONSULT A DOCTOR and show him the safety data sheet.

In the event of inhalation : remove the patient from affected area and let them rest in a well-ventilated place.

In feel faint or sick, call a doctor.

 

V - Handling and storage

Handling: Avoid contact (for sensitive skins) and inhalation of solvent steam.

Not eat and drink while working.

Storage : In a well-ventilated place (recommanded temperatures between 10 and 30°C).


VI - Control of Exposure / Individual Protection

Protective Measures: places where the product is stocked and/or manipulated must be well-ventilated.

The usual protective material must be used (gloves, goggles, overall…).


VII - Chemical and physical properties

No serious risk (soapy formulation with solvents products : see SDS)

 

VIII - Use

Apply to surfaces to be cleaned with a flexible brush or pressurized spray gun for large surfaces (tip 2.5 mm) and leave to act 1 to 5 minutes.

On smooth surfaces: Wipe off the Gel soap with absorbent paper, and then rinse with clear water.

On rustic surfaces: use a flexible brush to rub Gel soap into hollows, then wipe away the soap with absorbent paper. If traces remain, repeat the operation and rinse with clear water and brush or a low-pressure spray gun.

 

IX - Statutary Informations

88/379/EEC (classification and labelling)

Particularity : safety data sheet available on request.

This product is not to be considered as dangerous.



SPECIFICATION SHEET


I - Identification of product

Product Name : FLUORONET Cleaning product

Product Code : FLUORONET/GEL

Supplier : FluoroComposites – ZA Saint Louis – RN 100 –84250 Le Thor (France)


II - Composition / Information about components

Soluble in water.

Slightly thickening soap formulation with active tension solvent (without phosphates).

3% - 5% Alchilene

N.67/548/CEE :  607/194/00/1   CAS : 108/32/7   EINECS : 203/572/1

 

III - Hazard

No specific risks with normal use.


IV - First Aid

In the event of contact with skin : wash thoroughly with soap and water.

In the event of contact with eyes : wash immediatley with water for at least 10 minutes.

In the event of ingestion : induce vomiting. CONSULT A DOCTOR and show him the safety data sheet.

In the event of inhalation : remove the patient from affected area and let them rest in a well-ventilated place. In they feel faint or sick, call a doctor.


V - Handling and storage

Handling : Avoid contact (for sensitive skins) and inhalation of solvent steam.

Not eat and drink while working.

Storage : In a well-ventilated (recommended temperatures between 10 and 30 °C).

 

VI - Control of Exposure / Individual Protection

Protective Measures : places where the product is stocked and/or manipulated must be well-ventilated.

The usual protective material must be used (gloves, goggles, overall…).

 

VII - Chemical and physical properties

No serious risk (soapy formulation with solvents products : see SDS).

 

VIII - Use

Apply to surfaces to be cleaned with a flexible brush or pressurized spray gun for large surfaces (tip 2.5 mm) and leave to act 1 to 5 minutes.

On smooth surfaces: Wipe off the Gel soap with absorbent paper, and then rinse with clear water.

On rustic surfaces : use a flexible brush to rub Gel soap into hollows, then wipe away the soap with absorbent paper. If traces remain, repeat the opération and rinse with clear water and a brush or a low-pressure spray gun.

 

IX - Statutary Informations

88/379/EEC (classification et étiquetage)

Particularity : Safety data sheet available on request.

This product is not to be considered as dangerous.